YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Ni–Fe Alloy-Supported Intermediate Temperature SOFCs Using LaGaO3 Electrolyte Film for Quick Startup

    Source: Journal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 003::page 31205
    Author:
    Tatsumi Ishihara
    ,
    Jingwang Yan
    ,
    Makiko Enoki
    ,
    Sachio Okada
    ,
    Hiroshige Matsumoto
    DOI: 10.1115/1.2930763
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Intermediate temperature solid oxide fuel cells (SOFCs), which are highly tolerant against a thermal cycle, are studied by using the Ni–Fe porous alloy substrate prepared by an in situ reduction. It was found that Ni–Fe alloy exhibits high activity against anodic reaction and suitable compatibility with LaGaO3 electrolyte. The electrolyte film of La0.9Sr0.1Ga0.8Mg0.2O3 (LSGM) and Sm0.2Ce0.8O2 (SDC) bilayer with 5μm thickness was successfully prepared on the dense NiO–Fe2O3 composite anode. After a in situ reduction, the dense plate of NiO–Fe2O3 was changed to the porous Ni–Fe alloy substrate; however, the LSGM film can keep the dense state. The prepared Ni–Fe alloy that supported LSGM cell demonstrated the maximum power densities of 0.9W∕cm2 and 0.4W∕cm2 at 873K and 573K. After heating up to 873K within 540s, there is no crack formed on the film and almost the theoretical open circuit voltage was exhibited. In addition, the maximum power density of 400mW∕cm2 was achieved at 773K. After the thermal cycling, the decrease in the maximum power density was not large, and this suggests that the film is still gas tight and highly tolerant against the thermal cycle. Quick start characteristics of the metal support SOFC could expand the SOFC application to the electric source of a mobile-field-like automobile.
    keyword(s): Alloys , Solid oxide fuel cells , Temperature , Metals , Electrolytes , Anodes , Density , Heating , Circuits AND Cycles ,
    • Download: (356.7Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Ni–Fe Alloy-Supported Intermediate Temperature SOFCs Using LaGaO3 Electrolyte Film for Quick Startup

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/138333
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorTatsumi Ishihara
    contributor authorJingwang Yan
    contributor authorMakiko Enoki
    contributor authorSachio Okada
    contributor authorHiroshige Matsumoto
    date accessioned2017-05-09T00:28:41Z
    date available2017-05-09T00:28:41Z
    date copyrightAugust, 2008
    date issued2008
    identifier issn2381-6872
    identifier otherJFCSAU-28934#031205_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138333
    description abstractIntermediate temperature solid oxide fuel cells (SOFCs), which are highly tolerant against a thermal cycle, are studied by using the Ni–Fe porous alloy substrate prepared by an in situ reduction. It was found that Ni–Fe alloy exhibits high activity against anodic reaction and suitable compatibility with LaGaO3 electrolyte. The electrolyte film of La0.9Sr0.1Ga0.8Mg0.2O3 (LSGM) and Sm0.2Ce0.8O2 (SDC) bilayer with 5μm thickness was successfully prepared on the dense NiO–Fe2O3 composite anode. After a in situ reduction, the dense plate of NiO–Fe2O3 was changed to the porous Ni–Fe alloy substrate; however, the LSGM film can keep the dense state. The prepared Ni–Fe alloy that supported LSGM cell demonstrated the maximum power densities of 0.9W∕cm2 and 0.4W∕cm2 at 873K and 573K. After heating up to 873K within 540s, there is no crack formed on the film and almost the theoretical open circuit voltage was exhibited. In addition, the maximum power density of 400mW∕cm2 was achieved at 773K. After the thermal cycling, the decrease in the maximum power density was not large, and this suggests that the film is still gas tight and highly tolerant against the thermal cycle. Quick start characteristics of the metal support SOFC could expand the SOFC application to the electric source of a mobile-field-like automobile.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleNi–Fe Alloy-Supported Intermediate Temperature SOFCs Using LaGaO3 Electrolyte Film for Quick Startup
    typeJournal Paper
    journal volume5
    journal issue3
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2930763
    journal fristpage31205
    identifier eissn2381-6910
    keywordsAlloys
    keywordsSolid oxide fuel cells
    keywordsTemperature
    keywordsMetals
    keywordsElectrolytes
    keywordsAnodes
    keywordsDensity
    keywordsHeating
    keywordsCircuits AND Cycles
    treeJournal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 003
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian