Deformation of a Droplet in a Channel FlowSource: Journal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 004::page 41008DOI: 10.1115/1.2930774Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Formation of droplets especially in microchannels, micro-electro-mechanical systems (MEMS) and polymer electrolyte membrane fuel cells and their effects on the performance of these devises, as well as scientific aspect of the droplet behavior in the fluid flow motion, makes the subject of the droplet deformation and motion an attractive problem. In this work, we numerically simulate the deformation of a drop of water attached to the wall of a channel flow using full two-dimensional Navier–Stokes equation and the volume-of-fluid method for capturing the interface. The effects of channel inlet velocity, the density and viscosity of the surrounding fluid, and the surface tension coefficient on the flow structures both inside and outside of the droplet as well as the deformation of the droplets are examined. Several test cases, which cover rather wide range of the Reynolds and capillary numbers, based on the surrounding fluid properties and the diameter of the droplet are performed. The Reynolds number, Re, range is from 24 to 1800 and the capillary number, Ca, is from 0.014 to 0.219. It is found that the droplet shape changes and depending on the capillary and Reynolds numbers, it eventually reaches an equilibrium state when there is balance between the surface tension, inertia, and the viscous forces. It is also found that the deformation of the droplet does not depend on the capillary numbers, when Ca is small, but it is a strong function of Ca, when it is large.
keyword(s): Density , Force , Surface tension , Flow (Dynamics) , Deformation , Fluids , Viscosity , Reynolds number , Channel flow , Shapes , Drops AND Channels (Hydraulic engineering) ,
|
Collections
Show full item record
| contributor author | Ebrahim Shirani | |
| contributor author | Shila Masoomi | |
| date accessioned | 2017-05-09T00:28:39Z | |
| date available | 2017-05-09T00:28:39Z | |
| date copyright | November, 2008 | |
| date issued | 2008 | |
| identifier issn | 2381-6872 | |
| identifier other | JFCSAU-28935#041008_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/138310 | |
| description abstract | Formation of droplets especially in microchannels, micro-electro-mechanical systems (MEMS) and polymer electrolyte membrane fuel cells and their effects on the performance of these devises, as well as scientific aspect of the droplet behavior in the fluid flow motion, makes the subject of the droplet deformation and motion an attractive problem. In this work, we numerically simulate the deformation of a drop of water attached to the wall of a channel flow using full two-dimensional Navier–Stokes equation and the volume-of-fluid method for capturing the interface. The effects of channel inlet velocity, the density and viscosity of the surrounding fluid, and the surface tension coefficient on the flow structures both inside and outside of the droplet as well as the deformation of the droplets are examined. Several test cases, which cover rather wide range of the Reynolds and capillary numbers, based on the surrounding fluid properties and the diameter of the droplet are performed. The Reynolds number, Re, range is from 24 to 1800 and the capillary number, Ca, is from 0.014 to 0.219. It is found that the droplet shape changes and depending on the capillary and Reynolds numbers, it eventually reaches an equilibrium state when there is balance between the surface tension, inertia, and the viscous forces. It is also found that the deformation of the droplet does not depend on the capillary numbers, when Ca is small, but it is a strong function of Ca, when it is large. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Deformation of a Droplet in a Channel Flow | |
| type | Journal Paper | |
| journal volume | 5 | |
| journal issue | 4 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.2930774 | |
| journal fristpage | 41008 | |
| identifier eissn | 2381-6910 | |
| keywords | Density | |
| keywords | Force | |
| keywords | Surface tension | |
| keywords | Flow (Dynamics) | |
| keywords | Deformation | |
| keywords | Fluids | |
| keywords | Viscosity | |
| keywords | Reynolds number | |
| keywords | Channel flow | |
| keywords | Shapes | |
| keywords | Drops AND Channels (Hydraulic engineering) | |
| tree | Journal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 004 | |
| contenttype | Fulltext |