On the Flutter and Drag Forces on Flexible Rectangular Canopies in Normal FlowSource: Journal of Fluids Engineering:;2008:;volume( 130 ):;issue: 006::page 61203Author:Antonio Filippone
DOI: 10.1115/1.2928431Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The paper presents results of experimental investigations on flexible rectangular canopies fixed at two edges (tapes). Data are presented for the aerodynamic drag as a function of the planform area, the slenderness, and the Reynolds number. The slenderness varies from 3.3 to 30. The Reynolds number is limited to 2×106. The wind speed is in the range 6–19m∕s. The results show that the drag decreases with the increasing aspect ratio. The dominant parameter is the slenderness; a second dominant factor is the planform area. The drag is only weakly dependent on the Reynolds number. The analysis of the drag data indicates that a proper scaling parameter is the crosswise length scale. When normalization is done, the data tend to collapse into a single curve. A further study addressed the drag characteristics of the canopies with perforated planforms. Perforation of up to 6% of the planform area has been considered. Corrections for air permeability of the fabric are introduced. The drag is reduced roughly linearly with perforated area. A detailed study into the flutter characteristics of the canopies in the turbulent wind is presented. The investigation has highlighted different modes of oscillations, including deformations through folding and twisting, vertical flapping, rotations, and cross-type oscillations.
|
Collections
Show full item record
| contributor author | Antonio Filippone | |
| date accessioned | 2017-05-09T00:28:25Z | |
| date available | 2017-05-09T00:28:25Z | |
| date copyright | June, 2008 | |
| date issued | 2008 | |
| identifier issn | 0098-2202 | |
| identifier other | JFEGA4-27318#061203_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/138217 | |
| description abstract | The paper presents results of experimental investigations on flexible rectangular canopies fixed at two edges (tapes). Data are presented for the aerodynamic drag as a function of the planform area, the slenderness, and the Reynolds number. The slenderness varies from 3.3 to 30. The Reynolds number is limited to 2×106. The wind speed is in the range 6–19m∕s. The results show that the drag decreases with the increasing aspect ratio. The dominant parameter is the slenderness; a second dominant factor is the planform area. The drag is only weakly dependent on the Reynolds number. The analysis of the drag data indicates that a proper scaling parameter is the crosswise length scale. When normalization is done, the data tend to collapse into a single curve. A further study addressed the drag characteristics of the canopies with perforated planforms. Perforation of up to 6% of the planform area has been considered. Corrections for air permeability of the fabric are introduced. The drag is reduced roughly linearly with perforated area. A detailed study into the flutter characteristics of the canopies in the turbulent wind is presented. The investigation has highlighted different modes of oscillations, including deformations through folding and twisting, vertical flapping, rotations, and cross-type oscillations. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | On the Flutter and Drag Forces on Flexible Rectangular Canopies in Normal Flow | |
| type | Journal Paper | |
| journal volume | 130 | |
| journal issue | 6 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.2928431 | |
| journal fristpage | 61203 | |
| identifier eissn | 1528-901X | |
| tree | Journal of Fluids Engineering:;2008:;volume( 130 ):;issue: 006 | |
| contenttype | Fulltext |