Dynamic Model of 5kW SOFC CHP Test StationSource: Journal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 004::page 397Author:Jaakko Saarinen
,
Matias Halinen
,
Jukka Ylijoki
,
Matti Noponen
,
Pekka Simell
,
Jari Kiviaho
DOI: 10.1115/1.2759502Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A dynamical model for a 5kW class solid oxide fuel cell (SOFC) combined heat and power (CHP) test station has been composed using the APROS® environment. The model is based on a real test station being constructed and operated at VTT Technical Research Centre of Finland and it comprises the following main components of the real test system: the autothermal reforming unit, SOFC stack situated inside a furnace, catalytic afterburner, and three heat exchangers. The constructed model has been verified against experimental results obtained from the autothermal reforming unit, catalytic afterburner, and the two cathode side heat exchangers. The model has been used for the phenomenological studies of the system during current transient simulations using a simplified and fast zero-dimensional model including internal reforming reactions for the SOFC stack. The test station model was capable of operating at a speed of 18 times the real time using a standard personal computer.
keyword(s): Solid oxide fuel cells , Combined heat and power , Temperature , Heat exchangers , Fuels AND Furnaces ,
|
Collections
Show full item record
| contributor author | Jaakko Saarinen | |
| contributor author | Matias Halinen | |
| contributor author | Jukka Ylijoki | |
| contributor author | Matti Noponen | |
| contributor author | Pekka Simell | |
| contributor author | Jari Kiviaho | |
| date accessioned | 2017-05-09T00:24:22Z | |
| date available | 2017-05-09T00:24:22Z | |
| date copyright | November, 2007 | |
| date issued | 2007 | |
| identifier issn | 2381-6872 | |
| identifier other | JFCSAU-28931#397_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/136084 | |
| description abstract | A dynamical model for a 5kW class solid oxide fuel cell (SOFC) combined heat and power (CHP) test station has been composed using the APROS® environment. The model is based on a real test station being constructed and operated at VTT Technical Research Centre of Finland and it comprises the following main components of the real test system: the autothermal reforming unit, SOFC stack situated inside a furnace, catalytic afterburner, and three heat exchangers. The constructed model has been verified against experimental results obtained from the autothermal reforming unit, catalytic afterburner, and the two cathode side heat exchangers. The model has been used for the phenomenological studies of the system during current transient simulations using a simplified and fast zero-dimensional model including internal reforming reactions for the SOFC stack. The test station model was capable of operating at a speed of 18 times the real time using a standard personal computer. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Dynamic Model of 5kW SOFC CHP Test Station | |
| type | Journal Paper | |
| journal volume | 4 | |
| journal issue | 4 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.2759502 | |
| journal fristpage | 397 | |
| journal lastpage | 405 | |
| identifier eissn | 2381-6910 | |
| keywords | Solid oxide fuel cells | |
| keywords | Combined heat and power | |
| keywords | Temperature | |
| keywords | Heat exchangers | |
| keywords | Fuels AND Furnaces | |
| tree | Journal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 004 | |
| contenttype | Fulltext |