YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Development of Solid Oxide Fuel Cells and Short Stacks for Mobile Application

    Source: Journal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 004::page 384
    Author:
    M. Lang
    ,
    P. Szabo
    ,
    Z. Ilhan
    ,
    S. Cinque
    ,
    T. Franco
    ,
    G. Schiller
    DOI: 10.1115/1.2756569
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: At the German Aerospace Center (DLR) in Stuttgart, a lightweight stack design for mobile applications was developed in cooperation with the automotive industry (BMW, Munich; Elring-Klinger, Dettingen; Rhodius, Weissenburg). This concept is based on the application of stamped metal sheet bipolar plates into which porous metallic substrate-supported cells (MSCs) are integrated. The paper concentrates on the one hand on the investigation of plasma sprayed button cells with a diameter of 48mm on porous metallic substrates during reduction/oxidation and thermal cycling. On the other hand, another focus lies in the electrochemical testing of short stacks in the cassette arrangement. The microstructure of the cells was characterized by optical microscopy, scanning electron microscopy (SEM), X-ray diffraction, and energy dispersive microanalysis (EDX) before and after operation. The cells and short stacks were electrochemically characterized mainly by long-term measurements (life cycle), by current-voltage measurements, and by impedance spectroscopy. In order to understand the nature of degradation mechanisms, the open-circuit voltages (OCV), the ohmic resistances, and the polarization resistances, during dynamic operation are compared and discussed. In order to distinguish between degradation effects due to the dynamic operation and usual stationary effects, these values are compared to values of noncycled cells. All of the cells investigated were able to withstand ten redox and ten thermal cycles without severe failure. Their redox- and thermal-cycling behavior are strongly dependent on their OCVs, which decrease during cycling. This proves that thermomechanical stresses in the electrolyte layer play a major role for the electrochemical performance of the cells during cycling. The improvement of the electrodes during the first 200h of operation and the ohmic resistance of the cells are not significantly influenced by the cycling. The first four-cell short stack with the cassette arrangement shows promising results with an OCV of ∼4V and an overall power of 92W at 800°C. The performances of the single cells are in the range of 180–220mW∕cm2. The differences in cell performance can be attributed to different polarization resistances of the cells in the cassettes, which might be caused by a nonuniform gas supply in the short stack.
    keyword(s): Electric potential , Electrical resistance , Polarization (Electricity) , Plasmas (Ionized gases) , Solid oxide fuel cells , Cycles , Electrolytes , Wire , Stability , oxidation , Stress , Stack design , Impedance spectroscopy AND Mechanisms ,
    • Download: (1.184Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Development of Solid Oxide Fuel Cells and Short Stacks for Mobile Application

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/136082
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorM. Lang
    contributor authorP. Szabo
    contributor authorZ. Ilhan
    contributor authorS. Cinque
    contributor authorT. Franco
    contributor authorG. Schiller
    date accessioned2017-05-09T00:24:22Z
    date available2017-05-09T00:24:22Z
    date copyrightNovember, 2007
    date issued2007
    identifier issn2381-6872
    identifier otherJFCSAU-28931#384_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/136082
    description abstractAt the German Aerospace Center (DLR) in Stuttgart, a lightweight stack design for mobile applications was developed in cooperation with the automotive industry (BMW, Munich; Elring-Klinger, Dettingen; Rhodius, Weissenburg). This concept is based on the application of stamped metal sheet bipolar plates into which porous metallic substrate-supported cells (MSCs) are integrated. The paper concentrates on the one hand on the investigation of plasma sprayed button cells with a diameter of 48mm on porous metallic substrates during reduction/oxidation and thermal cycling. On the other hand, another focus lies in the electrochemical testing of short stacks in the cassette arrangement. The microstructure of the cells was characterized by optical microscopy, scanning electron microscopy (SEM), X-ray diffraction, and energy dispersive microanalysis (EDX) before and after operation. The cells and short stacks were electrochemically characterized mainly by long-term measurements (life cycle), by current-voltage measurements, and by impedance spectroscopy. In order to understand the nature of degradation mechanisms, the open-circuit voltages (OCV), the ohmic resistances, and the polarization resistances, during dynamic operation are compared and discussed. In order to distinguish between degradation effects due to the dynamic operation and usual stationary effects, these values are compared to values of noncycled cells. All of the cells investigated were able to withstand ten redox and ten thermal cycles without severe failure. Their redox- and thermal-cycling behavior are strongly dependent on their OCVs, which decrease during cycling. This proves that thermomechanical stresses in the electrolyte layer play a major role for the electrochemical performance of the cells during cycling. The improvement of the electrodes during the first 200h of operation and the ohmic resistance of the cells are not significantly influenced by the cycling. The first four-cell short stack with the cassette arrangement shows promising results with an OCV of ∼4V and an overall power of 92W at 800°C. The performances of the single cells are in the range of 180–220mW∕cm2. The differences in cell performance can be attributed to different polarization resistances of the cells in the cassettes, which might be caused by a nonuniform gas supply in the short stack.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleDevelopment of Solid Oxide Fuel Cells and Short Stacks for Mobile Application
    typeJournal Paper
    journal volume4
    journal issue4
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2756569
    journal fristpage384
    journal lastpage391
    identifier eissn2381-6910
    keywordsElectric potential
    keywordsElectrical resistance
    keywordsPolarization (Electricity)
    keywordsPlasmas (Ionized gases)
    keywordsSolid oxide fuel cells
    keywordsCycles
    keywordsElectrolytes
    keywordsWire
    keywordsStability
    keywordsoxidation
    keywordsStress
    keywordsStack design
    keywordsImpedance spectroscopy AND Mechanisms
    treeJournal of Fuel Cell Science and Technology:;2007:;volume( 004 ):;issue: 004
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian