Show simple item record

contributor authorPeter C. Hung
contributor authorSeán F. McLoone
contributor authorRobert J. Kee
contributor authorGeorge W. Irwin
date accessioned2017-05-09T00:23:14Z
date available2017-05-09T00:23:14Z
date copyrightMarch, 2007
date issued2007
identifier issn0022-0434
identifier otherJDSMAA-26367#194_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/135497
description abstractThermocouples are one of the most popular devices for temperature measurement due to their robustness, ease of manufacture and installation, and low cost. However, when used in the harsh environment found in combustion systems and automotive engine exhausts, large wire diameters are required and consequently the measurement bandwidth is reduced. This paper describes two new algorithmic compensation techniques based on blind deconvolution to address this loss of high-frequency signal components using the measurements from two thermocouples. In particular, a continuous-time approach is proposed, combined with a cross-relation blind deconvolution for parameter estimation. A feature of this approach is that no a priori assumption is made about the time constant ratio of the two thermocouples. The advantages, including small estimation variance and limitations of the method, are highlighted using results from simulation and test rig studies.
publisherThe American Society of Mechanical Engineers (ASME)
titleBlind Deconvolution for Two-Thermocouple Sensor Characterization
typeJournal Paper
journal volume129
journal issue2
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.2431814
journal fristpage194
journal lastpage202
identifier eissn1528-9028
keywordsNoise (Sound)
keywordsThermocouples
keywordsAlgorithms
keywordsSensors AND Signals
treeJournal of Dynamic Systems, Measurement, and Control:;2007:;volume( 129 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record