Benchmark of Plate Forming and Weld Distortion ProcessSource: Journal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 003::page 414Author:James Gombas
DOI: 10.1115/1.2218345Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A circular flat plate with a perforated central region is to be formed by dies into a dome and then welded onto a cylindrical shell. After welding, the dome must be spherical within a narrow tolerance band. This plate forming and welding is simulated using large deflection theory elastic-plastic finite element analysis. The manufacturing assessment is performed so that the dies may be designed to compensate for plate distortions that occur during various stages of manufacturing, including the effects of weld distortion. The manufacturing simulation benchmarks against measurements taken at several manufacturing stages from existing hardware. The manufacturing simulation process can then be used for future applications of similar geometries.
keyword(s): Measurement , Welding , Manufacturing , Simulation , Displacement , Shapes , Shrinkage (Materials) , Finite element analysis , Deformation , Pipes , Force AND Pressing (Garments) ,
|
Collections
Show full item record
| contributor author | James Gombas | |
| date accessioned | 2017-05-09T00:21:22Z | |
| date available | 2017-05-09T00:21:22Z | |
| date copyright | August, 2006 | |
| date issued | 2006 | |
| identifier issn | 0094-9930 | |
| identifier other | JPVTAS-28470#414_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/134507 | |
| description abstract | A circular flat plate with a perforated central region is to be formed by dies into a dome and then welded onto a cylindrical shell. After welding, the dome must be spherical within a narrow tolerance band. This plate forming and welding is simulated using large deflection theory elastic-plastic finite element analysis. The manufacturing assessment is performed so that the dies may be designed to compensate for plate distortions that occur during various stages of manufacturing, including the effects of weld distortion. The manufacturing simulation benchmarks against measurements taken at several manufacturing stages from existing hardware. The manufacturing simulation process can then be used for future applications of similar geometries. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Benchmark of Plate Forming and Weld Distortion Process | |
| type | Journal Paper | |
| journal volume | 128 | |
| journal issue | 3 | |
| journal title | Journal of Pressure Vessel Technology | |
| identifier doi | 10.1115/1.2218345 | |
| journal fristpage | 414 | |
| journal lastpage | 419 | |
| identifier eissn | 1528-8978 | |
| keywords | Measurement | |
| keywords | Welding | |
| keywords | Manufacturing | |
| keywords | Simulation | |
| keywords | Displacement | |
| keywords | Shapes | |
| keywords | Shrinkage (Materials) | |
| keywords | Finite element analysis | |
| keywords | Deformation | |
| keywords | Pipes | |
| keywords | Force AND Pressing (Garments) | |
| tree | Journal of Pressure Vessel Technology:;2006:;volume( 128 ):;issue: 003 | |
| contenttype | Fulltext |