Show simple item record

contributor authorJian D. Wang
contributor authorIan M. Howard
date accessioned2017-05-09T00:21:08Z
date available2017-05-09T00:21:08Z
date copyrightJanuary, 2006
date issued2006
identifier issn1050-0472
identifier otherJMDEDB-27819#90_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134379
description abstractFinite element analysis can incorporate two-dimensional (2D) modeling if the geometry, load, and boundary conditions meet the requirements. For many applications, a wide range of problems are solved in 2D, due to the efficiency and costs of computation. However, care has to be taken to avoid modeling errors from significantly influencing the result. When the application area is nonlinear, such as when modeling contact problems or fracture analysis, etc, the 2D assumption must be used cautiously. In this paper, a large number of 2D and three-dimensional (3D) gear models were investigated using finite element analysis. The models included contact analysis between teeth in mesh, a gear body (disk), and teeth with and without a crack at the tooth root. The model results were compared using parameters such as the torsional (mesh) stiffness, tooth stresses and the stress intensity factors that are obtained under assumptions of plane stress, plane strain, and 3D analysis. The models considered variations of face width of the gear from 5 mm to 300 mm. This research shows that caution must be used especially where 2D assumptions are used in the modeling of solid gears.
publisherThe American Society of Mechanical Engineers (ASME)
titleError Analysis on Finite Element Modeling of Involute Spur Gears
typeJournal Paper
journal volume128
journal issue1
journal titleJournal of Mechanical Design
identifier doi10.1115/1.2114891
journal fristpage90
journal lastpage97
identifier eissn1528-9001
keywordsStress
keywordsGears
keywordsErrors
keywordsFinite element analysis
keywordsModeling
keywordsStiffness
keywordsFracture (Process) AND Plane strain
treeJournal of Mechanical Design:;2006:;volume( 128 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record