| contributor author | Masatake Shiraishi | |
| contributor author | Hideyasu Sumiya | |
| contributor author | Shinichi Aoshima | |
| date accessioned | 2017-05-09T00:20:48Z | |
| date available | 2017-05-09T00:20:48Z | |
| date copyright | February, 2006 | |
| date issued | 2006 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27914#188_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/134217 | |
| description abstract | A modified triangular laser displacement sensor having a resolution of 1.0μm was used to measure the diameter of a turned workpiece with curvatures. This sensor was attached to a specially designed stage mounted on a precision slide unit and operated by three drive motors. In the measurement, the laser sensor was controlled by a θ motor depending on workpiece curvatures so that the illuminating laser beam is always normal to the part surface and can measure the workpiece diameter in an on-line fashion. This sensor positioning control was found to be effective for measuring the diameter of a curved workpiece with an accuracy of several micrometers. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | In-Process Diameter Measurement of Turned Workpiece With Curvatures by Using Sensor Positioning | |
| type | Journal Paper | |
| journal volume | 128 | |
| journal issue | 1 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.2122967 | |
| journal fristpage | 188 | |
| journal lastpage | 193 | |
| identifier eissn | 1528-8935 | |
| keywords | Lasers | |
| keywords | Sensors | |
| keywords | Displacement AND Laser beams | |
| tree | Journal of Manufacturing Science and Engineering:;2006:;volume( 128 ):;issue: 001 | |
| contenttype | Fulltext | |