YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Highly Efficient Conversion of Ammonia in Electricity by Solid Oxide Fuel Cells

    Source: Journal of Fuel Cell Science and Technology:;2006:;volume( 003 ):;issue: 004::page 499
    Author:
    N. J. J. Dekker
    ,
    G. Rietveld
    DOI: 10.1115/1.2349536
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Hydrogen is the fuel for fuel cells with the highest cell voltage. A drawback for the use of hydrogen is the low energy density storage capacity, even at high pressures. Liquid fuels such as gasoline and methanol have a high energy density but lead to the emission of the greenhouse gas CO2. Ammonia could be the ideal bridge fuel, having a high energy density at relative low pressure and no (local) CO2 emission. Ammonia as a fuel for the solid oxide fuel cell (SOFC) appears to be very attractive, as shown by cell tests with electrolyte supported cells (ESC) as well as anode supported cells (ASC) with an active area of 81cm2. The cell voltage was measured as function of the electrical current, temperature, gas composition and ammonia (NH3) flow. With NH3 as fuel, electrical cell efficiencies up to 70% (LHV) can be achieved at 0.35A∕cm2 and 60% (LHV) at 0.6A∕cm2. The cell degradation during 3000 h of operation was comparable with H2 fueled measurements. Due to the high temperature and the catalytic active Ni∕YSZ anode, NH3 cracks at the anode into H2 and N2 with a conversion of >99.996%. The high NH3 conversion is partly due to the withdrawal of H2 by the electrochemical cell reaction. The remaining NH3 will be converted in the afterburner of the system. The NOx outlet concentration of the fuel cell is low, typically <0.5ppm at temperatures below 950°C and around 4ppm at 1000°C. A SOFC system fueled with ammonia is relative simple compared with a carbon containing fuel, since no humidification of the fuel is necessary. Moreover, the endothermic ammonia cracking reaction consumes part of the heat produced by the fuel cell, by which less cathode cooling air is required compared with H2 fueled systems. Therefore, the system for a NH3 fueled SOFC will have relatively low parasitic power losses and relative small heat exchangers for preheating the cathode air flow.
    keyword(s): Temperature , Electric potential , Anodes , Flow (Dynamics) , Fuels , Fracture (Process) , Solid oxide fuel cells , Current density , Electrolytes , Fuel cells , Heat AND Measurement ,
    • Download: (462.1Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Highly Efficient Conversion of Ammonia in Electricity by Solid Oxide Fuel Cells

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/134039
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorN. J. J. Dekker
    contributor authorG. Rietveld
    date accessioned2017-05-09T00:20:29Z
    date available2017-05-09T00:20:29Z
    date copyrightNovember, 2006
    date issued2006
    identifier issn2381-6872
    identifier otherJFCSAU-28927#499_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134039
    description abstractHydrogen is the fuel for fuel cells with the highest cell voltage. A drawback for the use of hydrogen is the low energy density storage capacity, even at high pressures. Liquid fuels such as gasoline and methanol have a high energy density but lead to the emission of the greenhouse gas CO2. Ammonia could be the ideal bridge fuel, having a high energy density at relative low pressure and no (local) CO2 emission. Ammonia as a fuel for the solid oxide fuel cell (SOFC) appears to be very attractive, as shown by cell tests with electrolyte supported cells (ESC) as well as anode supported cells (ASC) with an active area of 81cm2. The cell voltage was measured as function of the electrical current, temperature, gas composition and ammonia (NH3) flow. With NH3 as fuel, electrical cell efficiencies up to 70% (LHV) can be achieved at 0.35A∕cm2 and 60% (LHV) at 0.6A∕cm2. The cell degradation during 3000 h of operation was comparable with H2 fueled measurements. Due to the high temperature and the catalytic active Ni∕YSZ anode, NH3 cracks at the anode into H2 and N2 with a conversion of >99.996%. The high NH3 conversion is partly due to the withdrawal of H2 by the electrochemical cell reaction. The remaining NH3 will be converted in the afterburner of the system. The NOx outlet concentration of the fuel cell is low, typically <0.5ppm at temperatures below 950°C and around 4ppm at 1000°C. A SOFC system fueled with ammonia is relative simple compared with a carbon containing fuel, since no humidification of the fuel is necessary. Moreover, the endothermic ammonia cracking reaction consumes part of the heat produced by the fuel cell, by which less cathode cooling air is required compared with H2 fueled systems. Therefore, the system for a NH3 fueled SOFC will have relatively low parasitic power losses and relative small heat exchangers for preheating the cathode air flow.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleHighly Efficient Conversion of Ammonia in Electricity by Solid Oxide Fuel Cells
    typeJournal Paper
    journal volume3
    journal issue4
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2349536
    journal fristpage499
    journal lastpage502
    identifier eissn2381-6910
    keywordsTemperature
    keywordsElectric potential
    keywordsAnodes
    keywordsFlow (Dynamics)
    keywordsFuels
    keywordsFracture (Process)
    keywordsSolid oxide fuel cells
    keywordsCurrent density
    keywordsElectrolytes
    keywordsFuel cells
    keywordsHeat AND Measurement
    treeJournal of Fuel Cell Science and Technology:;2006:;volume( 003 ):;issue: 004
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian