Show simple item record

contributor authorD. H. Maithripala
contributor authorW. P. Dayawansa
contributor authorJordan M. Berg
date accessioned2017-05-09T00:15:43Z
date available2017-05-09T00:15:43Z
date copyrightSeptember, 2005
date issued2005
identifier issn0022-0434
identifier otherJDSMAA-26344#443_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/131544
description abstractThis paper examines control strategies for electrostatically actuated microelectromechanical systems (MEMS), with the goals of using feasible measurements to eliminate the pull-in bifurcation, robustly stabilize any desired operating point in the capacitive gap, decrease settling time, and reduce overshoot. We show that input-output linearization, passivity-based design, and the theory of port-controlled Hamiltonian systems lead naturally to static output feedback of device charge. This formalizes and extends previously reported results from the MEMS literature. Further analysis suggests that significantly improving transient behavior in lightly damped MEMS requires dynamic estimation of electrode velocity. We implement output-feedback control using a reduced-order nonlinear observer. Simulations predict greatly improved transient behavior, and large reductions in control voltage.
publisherThe American Society of Mechanical Engineers (ASME)
titleControl of an Electrostatic Microelectromechanical System Using Static and Dynamic Output Feedback
typeJournal Paper
journal volume127
journal issue3
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1985443
journal fristpage443
journal lastpage450
identifier eissn1528-9028
keywordsMicroelectromechanical systems
keywordsFeedback
keywordsElectrodes
keywordsDamping
keywordsDynamics (Mechanics) AND Control equipment
treeJournal of Dynamic Systems, Measurement, and Control:;2005:;volume( 127 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record