Show simple item record

contributor authorZ. Situm
contributor authorD. Pavkovic
contributor authorB. Novakovic
date accessioned2017-05-09T00:12:37Z
date available2017-05-09T00:12:37Z
date copyrightJune, 2004
date issued2004
identifier issn0022-0434
identifier otherJDSMAA-26329#376_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/129792
description abstractIn this paper, a design procedure and experimental implementation of a PID controller is presented. The PID controller is tuned according to damping optimum in order to achieve precise position control of a pneumatic servo drive. It is extended by a friction compensation and stabilization algorithm in order to deal with friction effects. In a case of supply pressure variations, more robust control system is needed. It is implemented by extending the proposed PID controller with friction compensator with the gain scheduling algorithm, which is provided by means of fuzzy logic. The effectiveness of proposed control algorithms is experimentally verified on an industrial cylindrical rodless actuator controlled by a proportional valve.
publisherThe American Society of Mechanical Engineers (ASME)
titleServo Pneumatic Position Control Using Fuzzy PID Gain Scheduling
typeJournal Paper
journal volume126
journal issue2
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1767857
journal fristpage376
journal lastpage387
identifier eissn1528-9028
keywordsPressure
keywordsFriction
keywordsControl systems
keywordsControl equipment
keywordsServo drives
keywordsGain scheduling
keywordsAlgorithms
keywordsDamping
keywordsServomechanisms
keywordsFuzzy logic
keywordsPosition control
keywordsSignals
keywordsMotion
keywordsProportional valves
keywordsControl algorithms
keywordsForce AND Cylinders
treeJournal of Dynamic Systems, Measurement, and Control:;2004:;volume( 126 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record