Show simple item record

contributor authorP. Belli
contributor authorS. Bittanti
contributor authorA. De Marco
date accessioned2017-05-09T00:12:28Z
date available2017-05-09T00:12:28Z
date copyrightDecember, 2004
date issued2004
identifier issn0022-0434
identifier otherJDSMAA-26336#811_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/129719
description abstractHot rolling mills suffer from severe torsional vibrations in particular working conditions (thin thickness). These vibrations are often explained as the result of an exogenous disturbance amplified by a resonance effect. In this paper, we show that these vibrations are in fact produced by the interaction between the kinematic chain and the phenomenon of the plastic deformation of the strip occurring in the roll bite. Precisely, the vibrations are the expression of an unstable limit cycle due to the combination of the dynamics associated with these two effects. Starting from this key observation, the vibration attenuation control problem is studied. First of all, by investigating the observability and controllability properties, it can be seen that there is a basic controllability problem in the standard configuration of the plant. To circumvent it, it is proposed to modify some mechanical characteristics so as to ensure the system controllability. Then a suitable active control system based on frequency domain concepts can be designed. The proposed control system neutralizes the torsional vibration, and therefore it allows one to preserve the system integrity while increasing plant efficiency and productivity.
publisherThe American Society of Mechanical Engineers (ASME)
titleOn the Origin of Torsional Vibrations in Hot Rolling Mills and a Possible Remedy
typeJournal Paper
journal volume126
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1850531
journal fristpage811
journal lastpage823
identifier eissn1528-9028
keywordsTorque
keywordsChain
keywordsVibration
keywordsHot rolling
keywordsIndustrial plants
keywordsDeformation
keywordsStrips
keywordsThickness
keywordsSpindles (Textile machinery)
keywordsEquations AND Control systems
treeJournal of Dynamic Systems, Measurement, and Control:;2004:;volume( 126 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record