Show simple item record

contributor authorRobert Cheesewright
contributor authorAli Belhadj
contributor authorColin Clark
date accessioned2017-05-09T00:09:49Z
date available2017-05-09T00:09:49Z
date copyrightMarch, 2003
date issued2003
identifier issn0022-0434
identifier otherJDSMAA-26314#103_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/128158
description abstractAn analytical study of the response of a simple Coriolis meter subjected to external mechanical vibrations and corresponding finite element studies of three commercially available meters are presented. These show that vibrations produce additional components in the meter sensor signals but that these components are only at the frequency of the vibrations. The results show that errors reported in vibration experiments, using any frequency except the meter drive frequency, are due to failure of the determination of the phase difference between the sensor signals. The results also show that external vibrations at the meter drive frequency produce a meter error regardless of the phase detection algorithm.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of Mechanical Vibrations on Coriolis Mass Flow Meters
typeJournal Paper
journal volume125
journal issue1
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1539098
journal fristpage103
journal lastpage113
identifier eissn1528-9028
keywordsMotion
keywordsVibration
keywordsFlow (Dynamics)
keywordsSensors
keywordsSignals
keywordsFinite element analysis AND Errors
treeJournal of Dynamic Systems, Measurement, and Control:;2003:;volume( 125 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record