Show simple item record

contributor authorMeng-Shiun Tsai
contributor authorJin-Shin Chen
date accessioned2017-05-09T00:09:49Z
date available2017-05-09T00:09:49Z
date copyrightMarch, 2003
date issued2003
identifier issn0022-0434
identifier otherJDSMAA-26314#96_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/128157
description abstractA new approximate model, which consists of a variable gain and a variable time-delay, is proposed to describe the hysteresis behavior of a piezoactuator. The variable gain is assumed to be a function of the magnitude of the input command, while the time-delay is assumed to be a function of the frequency of the input command. The ranges of these two variable parameters are determined through open loop tests. According to the proposed approximate model, a Smith predictor-based robust H∞ controller is developed to achieve high-precision tracking control of a piezoactuator. Analytical simulation and experimental results on tracking several types of reference inputs demonstrate that the maximum tracking error can be reduced to be less than 2% of the traveling path by utilizing the proposed controller design.
publisherThe American Society of Mechanical Engineers (ASME)
titleRobust Tracking Control of a Piezoactuator Using a New Approximate Hysteresis Model
typeJournal Paper
journal volume125
journal issue1
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1540114
journal fristpage96
journal lastpage102
identifier eissn1528-9028
keywordsControl equipment
keywordsDesign
keywordsDelays
keywordsErrors
keywordsTravel
keywordsTracking control
keywordsSimulation
keywordsFrequency
keywordsAccuracy
keywordsIndustrial plants AND Structural dynamics
treeJournal of Dynamic Systems, Measurement, and Control:;2003:;volume( 125 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record