Show simple item record

contributor authorSteffen Müller
contributor authorMichael Uchanski
contributor authorKarl Hedrick
date accessioned2017-05-09T00:09:44Z
date available2017-05-09T00:09:44Z
date copyrightDecember, 2003
date issued2003
identifier issn0022-0434
identifier otherJDSMAA-26325#607_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/128094
description abstractWe develop and test a “slip-based” method to estimate the maximum available tire-road friction during braking. The method is based on the hypothesis that the low-slip, low-μ parts of the slip curve used during normal driving can indicate the maximum tire-road friction coefficient, μmax. We find support for this hypothesis in the literature and through experiments. The friction estimation algorithm uses data from short braking maneuvers with peak accelerations of 3.9 m/s2 to classify the road surface as either dry (μmax≈1) or lubricated (μmax≈0.6). Significant measurement noise makes it difficult to detect the subtle effect being measured, leading to a misclassification rate of 20%.
publisherThe American Society of Mechanical Engineers (ASME)
titleEstimation of the Maximum Tire-Road Friction Coefficient
typeJournal Paper
journal volume125
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1636773
journal fristpage607
journal lastpage617
identifier eissn1528-9028
keywordsForce
keywordsFriction
keywordsBraking
keywordsRoads
keywordsTires
keywordsWheels
keywordsSensors
keywordsVehicles AND Traction
treeJournal of Dynamic Systems, Measurement, and Control:;2003:;volume( 125 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record