| contributor author | Sean R. H. Davidson | |
| contributor author | David F. James | |
| date accessioned | 2017-05-09T00:09:31Z | |
| date available | 2017-05-09T00:09:31Z | |
| date copyright | June, 2003 | |
| date issued | 2003 | |
| identifier issn | 0148-0731 | |
| identifier other | JBENDY-26322#305_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/127979 | |
| description abstract | Thermo-mechanical equations were developed from machining theory to predict heat generation due to drilling and were coupled with a heat transfer FEM simulation to predict the temperature rise and thermal injury in bone during a drilling operation. The rotational speed, feed rate, drill geometry and bone material properties were varied in a parametric analysis to determine the importance of each on temperature rise and therefore on thermal damage. It was found that drill speed, feed rate and drill diameter had the most significant thermal impact while changes in drill helix angle, point angle and bone thermal properties had relatively little effect. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Drilling in Bone: Modeling Heat Generation and Temperature Distribution | |
| type | Journal Paper | |
| journal volume | 125 | |
| journal issue | 3 | |
| journal title | Journal of Biomechanical Engineering | |
| identifier doi | 10.1115/1.1535190 | |
| journal fristpage | 305 | |
| journal lastpage | 314 | |
| identifier eissn | 1528-8951 | |
| keywords | Heat | |
| keywords | Temperature | |
| keywords | Drills (Tools) | |
| keywords | Drilling AND Bone | |
| tree | Journal of Biomechanical Engineering:;2003:;volume( 125 ):;issue: 003 | |
| contenttype | Fulltext | |