Show simple item record

contributor authorPrabhakar R. Pagilla
contributor authorBiao Yu
date accessioned2017-05-09T00:04:32Z
date available2017-05-09T00:04:32Z
date copyrightMarch, 2001
date issued2001
identifier issn0022-0434
identifier otherJDSMAA-26279#93_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/124997
description abstractControl of robotic surface finishing processes such as deburring, grinding, chamfering, and polishing is considered in this paper. A complete dynamic model that describes the dynamic behavior of the robot for surface finishing tasks is developed. A complete surface finishing task is divided into three phases (free motion phase, transition phase, and constrained motion phase) depending on the location of the robot end-effector with respect to the constraint surface. Stable control algorithms are developed for each phase. Emphasis is given to the transition phase and constrained motion phase, where surface finishing takes place. An experimental platform for performing robotic surface finishing operations is developed. The robotic surface finishing system consists of a planar robot with a force sensor and a deburring tool on its end-effector, and a fixture to hold the constraint surface. Extensive experiments based on the proposed control design were conducted for both surface following and surface finishing. Results of surface following and surface finishing experiments are shown and discussed.
publisherThe American Society of Mechanical Engineers (ASME)
titleRobotic Surface Finishing Processes: Modeling, Control, and Experiments
typeJournal Paper
journal volume123
journal issue1
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1344881
journal fristpage93
journal lastpage102
identifier eissn1528-9028
keywordsForce
keywordsMotion
keywordsRobots
keywordsRobotics
keywordsSurface finishing
keywordsEnd effectors
keywordsGrinding
keywordsModeling AND Control algorithms
treeJournal of Dynamic Systems, Measurement, and Control:;2001:;volume( 123 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record