Show simple item record

contributor authorAmnon Katz
contributor authorCudworth Professor
contributor authorAlton Highsmith
contributor authorEngineering Research Associate
date accessioned2017-05-09T00:04:31Z
date available2017-05-09T00:04:31Z
date copyrightMarch, 2001
date issued2001
identifier issn0022-0434
identifier otherJDSMAA-26279#49_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/124991
description abstractThe level of thermal noise in a resonant vibrating beam gyroscope is lower, the longer the beam. A limitation on the length of the beam arises from the consideration that the beam acts as a mechanical bandpass filter transmitting the signal being measured (the instantaneous rate of rotation) from the drive axis to the sense axis. A longer beam vibrates at a lower frequency and has a narrower resonance. The length that is acceptable depends on the bandwidth of the time variation of angular rate, which in turn, depends on the nature and mission of the vehicle that uses the gyroscope for inertial navigation. High rates of maneuvering indicate millimeter scale gyroscopes that are realized as micro-electro-mechanical devices. In the case of General Aviation, considerations of noise, as well as cost, favor a centimeter scale device.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Optimal Size of a Resonant Vibrating Beam Gyroscope
typeJournal Paper
journal volume123
journal issue1
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.1341201
journal fristpage49
journal lastpage53
identifier eissn1528-9028
keywordsResonance
keywordsNoise (Sound)
keywordsSignals
keywordsNavigation
keywordsFilters
keywordsVehicles
keywordsForce
keywordsRotation AND Aviation
treeJournal of Dynamic Systems, Measurement, and Control:;2001:;volume( 123 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record