Show simple item record

contributor authorEric R. Upchurch
contributor authorHung V. Vu
date accessioned2017-05-09T00:02:07Z
date available2017-05-09T00:02:07Z
date copyrightMarch, 2000
date issued2000
identifier issn0022-0434
identifier otherJDSMAA-26262#222_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/123485
description abstractThis paper presents a mathematical model of a pneumatic turbine and its pneumatically energized speed control system. The turbine and speed control drive an auxiliary hydraulic pump used on commercial aircraft as a backup system should the main pumps fail. The mathematical model presented here is highly nonlinear, which is a direct consequence of using air to energize the speed control system. The equations that describe air flow between and air pressure within the various control system compartments cannot be linearized. Therefore, no attempt was made to linearize any portion of the model. The actual control system is known to have different performance characteristics (e.g., limit cycle problems and stable performance) for different operating conditions. Model simulations run under these same conditions exhibit the same performance characteristics as the actual control system. At this basic level of comparison, the model yields acceptable results.
publisherThe American Society of Mechanical Engineers (ASME)
titleModeling a Pneumatic Turbine Speed Control System
typeJournal Paper
journal volume122
journal issue1
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.482467
journal fristpage222
journal lastpage225
identifier eissn1528-9028
keywordsPressure
keywordsControl systems
keywordsTurbines
keywordsValves
keywordsGovernors
keywordsModeling
keywordsPistons AND Hydraulic pumps
treeJournal of Dynamic Systems, Measurement, and Control:;2000:;volume( 122 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record