YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    OMPAC Package C5 Reliability—Parametric Study

    Source: Journal of Electronic Packaging:;1999:;volume( 121 ):;issue: 001::page 18
    Author:
    B. Nagaraj
    DOI: 10.1115/1.2792655
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Over molded pad array carrier (OMPAC) also called as ball grid array (BGA) has been used in products, such as hand held two way radio within Motorola. Now it has gained interest outside Motorola in companies like Compaq for portable computers and AT&T for the telephone systems. The reduced size, thickness, and increased I/O density at the board level are the attractive features of the OMPAC package over other competing package types. In Ref. [1, 2], life time of C5 solder interconnects under temperature cycle loading was reported. That study was based on nonlinear FEM simulation incorporating creep behavior of the solder. In the current study, influence of four key package design variables on C5 solder reliability is addressed using analyses methodology described in Ref. [1, 2]. The selected design variables are thickness of the substrate, the C5 pitch, solder ball diameter, and height to diameter (h/d) ratio of the C5 interconnect. For each design variable, three levels (low, middle, and high) are considered. The full study required a total of 81 simulation runs. However, statistical design of experiments were used and an L9 design was selected in the current study. The maximum permanent strain range for stabilized temperature cycle was calculated for all the nine case studies. In all the cases it occurs at the substrate interface in the solder ball just inside the edge of the die. The response (maximum total permanent strain range and thus maximum number of temperature cycles before failure) as a function of the four design variables are studied and the trends are: as the substrate thickness, C5 ball diameter and C5 (h/d) ratio increases and C5 pitch decreases, the maximum total permanent strain range decreases and thus cycles to failure increases. The order of importance of the design variables for the C5 reliability are (i) the C5 (h/d) ratio, (ii) the C5 ball diameter, (iii) the C5 pitch, and (iv) the substrate thickness. The C5 (h/d) is the key design variable. The maximum total permanent strain range decreases from 0.0055 for (h/d) ratio of 0.5 to 0.0045 for (h/d) ratio of 0.7. This in other words increases cycles to failure from 3000 cycles to 4400 cycles, an improvement of 47 percent.
    keyword(s): Reliability , Design , Cycles , Solders , Thickness , Failure , Temperature , Simulation , Ball-Grid-Array packaging , Finite element model , Experimental design , Finite element methods , Computers , Density AND Creep ,
    • Download: (586.0Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      OMPAC Package C5 Reliability—Parametric Study

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/122020
    Collections
    • Journal of Electronic Packaging

    Show full item record

    contributor authorB. Nagaraj
    date accessioned2017-05-08T23:59:23Z
    date available2017-05-08T23:59:23Z
    date copyrightMarch, 1999
    date issued1999
    identifier issn1528-9044
    identifier otherJEPAE4-26171#18_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/122020
    description abstractOver molded pad array carrier (OMPAC) also called as ball grid array (BGA) has been used in products, such as hand held two way radio within Motorola. Now it has gained interest outside Motorola in companies like Compaq for portable computers and AT&T for the telephone systems. The reduced size, thickness, and increased I/O density at the board level are the attractive features of the OMPAC package over other competing package types. In Ref. [1, 2], life time of C5 solder interconnects under temperature cycle loading was reported. That study was based on nonlinear FEM simulation incorporating creep behavior of the solder. In the current study, influence of four key package design variables on C5 solder reliability is addressed using analyses methodology described in Ref. [1, 2]. The selected design variables are thickness of the substrate, the C5 pitch, solder ball diameter, and height to diameter (h/d) ratio of the C5 interconnect. For each design variable, three levels (low, middle, and high) are considered. The full study required a total of 81 simulation runs. However, statistical design of experiments were used and an L9 design was selected in the current study. The maximum permanent strain range for stabilized temperature cycle was calculated for all the nine case studies. In all the cases it occurs at the substrate interface in the solder ball just inside the edge of the die. The response (maximum total permanent strain range and thus maximum number of temperature cycles before failure) as a function of the four design variables are studied and the trends are: as the substrate thickness, C5 ball diameter and C5 (h/d) ratio increases and C5 pitch decreases, the maximum total permanent strain range decreases and thus cycles to failure increases. The order of importance of the design variables for the C5 reliability are (i) the C5 (h/d) ratio, (ii) the C5 ball diameter, (iii) the C5 pitch, and (iv) the substrate thickness. The C5 (h/d) is the key design variable. The maximum total permanent strain range decreases from 0.0055 for (h/d) ratio of 0.5 to 0.0045 for (h/d) ratio of 0.7. This in other words increases cycles to failure from 3000 cycles to 4400 cycles, an improvement of 47 percent.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleOMPAC Package C5 Reliability—Parametric Study
    typeJournal Paper
    journal volume121
    journal issue1
    journal titleJournal of Electronic Packaging
    identifier doi10.1115/1.2792655
    journal fristpage18
    journal lastpage22
    identifier eissn1043-7398
    keywordsReliability
    keywordsDesign
    keywordsCycles
    keywordsSolders
    keywordsThickness
    keywordsFailure
    keywordsTemperature
    keywordsSimulation
    keywordsBall-Grid-Array packaging
    keywordsFinite element model
    keywordsExperimental design
    keywordsFinite element methods
    keywordsComputers
    keywordsDensity AND Creep
    treeJournal of Electronic Packaging:;1999:;volume( 121 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian