| contributor author | Ta-Cheng Loo | |
| contributor author | R. M. Evan-Iwanowski | |
| date accessioned | 2017-05-08T23:38:40Z | |
| date available | 2017-05-08T23:38:40Z | |
| date copyright | September, 1966 | |
| date issued | 1966 | |
| identifier issn | 0021-8936 | |
| identifier other | JAMCAV-25834#612_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/110379 | |
| description abstract | In this paper the critical combinations of uniform pressures and concentrated loads at the apex acting on shallow spherical shells have been determined analytically and experimentally. The Dini-Bessel expansion of unknown functions, proposed first in [4], have been applied to the problem on hand. Test specimens void of initial geometrical imperfections and negligible residual stresses have been fabricated in the laboratory by using the die-pressing technique. The analytically calculated critical combinations are in good agreement with those determined experimentally. The theoretical lower-bound, or the cut-off values, of the geometry parameter, μ, is found to be near the experimental values. The existence of the analytical and experimental cut-off values of γ2 indicates that there is a lower bound of the values of uniform pressures such that a shell does not exhibit a snap-through instability when subjected for any combinations of concentrated loads and uniform pressures below its cut-off value. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Interaction of Critical Pressures and Critical Concentrated Loads Acting on Shallow Spherical Shells | |
| type | Journal Paper | |
| journal volume | 33 | |
| journal issue | 3 | |
| journal title | Journal of Applied Mechanics | |
| identifier doi | 10.1115/1.3625128 | |
| journal fristpage | 612 | |
| journal lastpage | 616 | |
| identifier eissn | 1528-9036 | |
| keywords | Stress | |
| keywords | Shallow spherical shells | |
| keywords | Shells | |
| keywords | Functions | |
| keywords | Geometry | |
| keywords | Residual stresses AND Pressing (Garments) | |
| tree | Journal of Applied Mechanics:;1966:;volume( 033 ):;issue: 003 | |
| contenttype | Fulltext | |