Search
Now showing items 1-10 of 33
Reductions in Unburned Ammonia and Nitrous Oxide Emissions From an Ammonia-Assisted Diesel Engine With Early Timing Diesel Pilot Injection
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The global drive to limit the effects of climate change affords a strong incentive to reduce CO2 emissions. H2 is one of the cleanest energy sources, because its combustion does not produce CO2. It is well known that NH3 ...
Behavior of Soft Spheres During Impact by High-Speed Photography
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Previously, it has been verified experimentally for durations of impact that the Hertz theory (the quasi-statical theory) holds during impact of spheres without any exception. However, no measurement ...
Extensive Theory of Force-Approach Relations of Elastic Spheres in Compression and in Impact
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The prevailing Hertz theory in contact and in impact is based on the total compressive displacement of a semi-infinite elastic body. This paper considers displacements of finite elastic medium ...
Discussion of “Settlement of the Kansai International Airport Islands” by G. Mesri and J. R. Funk
Publisher: American Society of Civil Engineers
Fatigue Tests of Weathered Welded Joints
Publisher: American Society of Civil Engineers
Abstract: The fatigue behavior of weathered welded specimens of weathering steel (JIS SMA50) and structural steel (SM50) was investigated. Sixty‐six (66) stiffener specimens and 62 gusset specimens were tested under constant amplitude ...
Modeling and Implementation of the Isotache Concept for Long-Term Consolidation Behavior
Publisher: American Society of Civil Engineers
Abstract: A practical use of the isotache concept in creep settlement prediction is newly introduced in this study. The isotache concept introduces a unique relationship between the strain and the consolidation pressure corresponding ...
Modeling of the Holding Force in an Electromagnetic Chuck
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper addresses the modeling and prediction of the normal holding force in an electromagnetic chuck used in precision machining applications. Knowledge of the normal holding force is necessary ...
Stability-Optimized Clearance Configuration of Fluid-Film Bearings
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The whirl instability occurs at higher rotating speeds for a full circular fluid-film journal bearing, and many types of clearance configuration have been proposed to solve this instability ...
Liquefaction Resistance of Sandy Soils under Partially Drained Condition
Publisher: American Society of Civil Engineers
Abstract: In order to simulate the effect of drainage on soils adjacent to gravel drains that are installed as countermeasure against liquefaction, several series of cyclic triaxial tests were performed on saturated sands under ...
Effects of Decay Heat Distribution on Water Temperature in a Spent Fuel Pit and Prediction Errors With a One Region Model
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A prediction system with a oneregion (1R) model was developed to predict water temperature in a spent fuel pit (SFP) after the shutdown of its cooling systems based on threedimensional (3D) thermalhydraulic behavior computed ...
CSV
RIS