Search
CSV
RISDiscussion: “An LPG Pipeline Break Flow Model” (Morrow, T. B., Bass, R. L., and Lock, J. A., 1983, ASME J. Energy Resour. Technol., 105, pp. 379–387)
Publisher: The American Society of Mechanical Engineers (ASME)
Optimal Second-Law Efficiency for a Brayton Cycle With an Internal Heat Source
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Net work of an endoreversible Brayton cycle and its second-law efficiency are examined for a heat source (hot air) that is initially at a temperature typical of adiabatic and stoichiometric ...
Determination of Plastic Contact Length Between Chip and Tool in Machining
Publisher: The American Society of Mechanical Engineers (ASME)
Further Studies on Elastic Properties of Douglas Fir
Publisher: American Society of Civil Engineers
Abstract: The objective of this study was to examine the elastic behavior of Douglas fir in the radial‐longitudinal plane. Parallel‐ and perpendicular‐to‐grain tensile test results were used to establish linear elastic behavior. ...
Transverse Projectile Impacts on Beams
Publisher: The American Society of Mechanical Engineers (ASME)
Failure Theories for Douglas‐Fir in Tension
Publisher: American Society of Civil Engineers
Abstract: This study investigated the tensile strength of Douglas-fir loaded at an angle to the grain. Strength was determined for grain angles of 15, 30, 45 and 60 degrees in the radial-longitudinal plane. Strength was found to ...
Evaluation of Brayton and Rankine Alternatives for Diesel Waste Heat Exploitation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A diesel engine may produce exhaust-gas thermal energy in excess of that needed for turbocharging. Alternatives for exploitation of the energy by producing work may be direct expansion through ...
Web Buckle at I-40 Bridge Test
Publisher: American Society of Civil Engineers
Abstract: An unexpected, but explainable, web buckle occurred during the field testing of the I-40 bridge over the Rio Grande in Albuquerque, N.M. The three-span continuous steel plate-girder bridge had a defect (physical cut) ...