Search
Now showing items 1-5 of 5
Experimental Study of Shaft Resistance of Model Piles in Fluidized and Nonfluidized Fine Sand
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Torpedo piles installed by dynamic penetration have been used as anchors in the Brazilian offshore oil production infrastructure practice for two decades. Dynamic penetration aided by fluidization of the soil during pile ...
Effects of Interface Roughness, Particle Geometry, and Gradation on the Sand–Steel Interface Friction Angle
Publisher: American Society of Civil Engineers
Abstract: Determination of interface shear strength is crucial in the design of many geotechnical structures. To study the effect of interface roughness, particle geometry (size and shape), and sand gradation on the interface friction ...
Effect of Surface Roughness on the Shaft Resistance of Displacement Model Piles in Sand
Publisher: American Society of Civil Engineers
Abstract: This paper presents the results of tensile load tests performed with instrumented model piles with different surface roughnesses jacked into sand samples in a half-circular calibration chamber with digital image correlation ...
Short-Term Setup of Jacked Piles in a Calibration Chamber
Publisher: American Society of Civil Engineers
Abstract: The time-dependent increase in axial resistance (setup) of jacked or driven piles in sand is still not well understood, and its quantification remains a challenge. In this paper, a series of tests is performed on model ...
Novel Approach for Assessing Pile Base Response
Publisher: American Society of Civil Engineers
Abstract: AbstractThis paper proposes a numerical approach to evaluate the base load–settlement response
of cast-in-situ piles in sandy soils. The method assumes that the load response of
the pile base can be modeled as the response ...
CSV
RIS