Search
Now showing items 1-10 of 92
Introduction to the 54th Karl Terzaghi Lecture
Publisher: ASCE
Abstract: Dr. Rudolph Bonaparte delivered the 54th Terzaghi Lecture on March 8th, 2018, at IFCEE 2018 held in Orlando, Florida. This introduction briefly reviews Dr. Bonaparte’s contributions to geotechnical engineering and discusses ...
Introduction to the 21st Ralph B. Peck Award Lecture
Publisher: ASCE
Abstract: Dr. Anand Puppala delivered the 21st Ralph B. Peck Award Lecture on February 28, 2020, at the ASCE GeoCongress event held in Minneapolis, Minnesota. This introduction briefly reviews Dr. Puppala’s contributions to geotechnical ...
Dilatancy and Shear Strength of Sand at Low Confining Pressures
Publisher: American Society of Civil Engineers
Abstract: Sand dilates with shearing at a rate that increases with increasing relative density
Load and Resistance Factors for Internal Stability Checks of Mechanically Stabilized Earth Walls
Publisher: American Society of Civil Engineers
Abstract: This paper focuses on the development of load and resistance factor design (LRFD) for checks of the internal stability of mechanically stabilized earth (MSE) walls reinforced with steel strips. The internal stability of ...
Load and Resistance Factors for External Stability Checks of Mechanically Stabilized Earth Walls
Publisher: American Society of Civil Engineers
Abstract: The use of load and resistance factor design (LRFD) to design geotechnical components of transportation infrastructure in the United States is now mandated by the Federal Highway Administration (FHWA). The advantages of ...
Load and Resistance Factor Design of Drilled Shafts in Sand
Publisher: American Society of Civil Engineers
Abstract: Resistance factors are developed for drilled shafts for a design method based on soil variables. The uncertainties associated with the design variables and equations were systematically quantified, and Monte-Carlo simulations ...
Reliability Analysis of Load and Resistance Factor Design of Slopes
Publisher: American Society of Civil Engineers
Abstract: A logical framework is developed for the LRFD of slopes based on reliability analysis. The LRFD of slopes with resistance factors developed in this manner ensures that a target probability of slope failure is not exceeded. ...
Closure to “Load and Resistance Factor Design of Drilled Shafts in Sand” by D. Basu and Rodrigo Salgado
Publisher: American Society of Civil Engineers
Estimation of Bearing Capacity of Circular Footings on Sands Based on Cone Penetration Test
Publisher: American Society of Civil Engineers
Abstract: In the present paper, the estimation of limit unit bearing capacity
Closure to “Estimation of Bearing Capacity of Circular Footings on Sands Based on Cone Penetration Test” by Junhwan Lee and Rodrigo Salgado
Publisher: American Society of Civil Engineers
CSV
RIS