Search
Now showing items 1-6 of 6
The Effect of Environment on Thermal Barrier Coating Lifetime
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: While the water vapor content of the combustion gas in natural gasfired landbased turbines is ∼10%, it can be 20–85% with coalderived (syngas or H2) fuels or innovative turbine concepts for more efficient carbon capture. ...
The Effect of Coating Composition and Geometry on Thermal Barrier Coatings Lifetime
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Several factors are being investigated that affect the performance of thermal barrier coatings (TBC) for use in land-based gas turbines where coatings are mainly thermally sprayed. This study examined high velocity oxygen ...
The Impact of Oxidation-Induced Degradation on Materials Used in Hydrogen-Fired Microturbines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Hydrogen-fueled microturbines are being considered as part of the future green microgrid. However, the use of hydrogen as a fuel presents new challenges for selection and development of suitable high temperature materials ...
Effect of Air Plasma Sprayed Flash Bond Coatings on Furnace Cycle Lifetime of Disks and Rods
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Air plasma sprayed (APS) flash coatings on high velocity oxygen fuel (HVOF) bond coatings are well known to extend the lifetime of thermal barrier coatings (TBCs). Recent work compared flash coatings of NiCoCrAlY and ...
Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°–650°C
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Direct-fired supercritical CO2 (sCO2) power cycles are a pathway to low-CO2 fossil energy but contain O2 and H2O in the sCO2 from combustion. The effect of impurities on structural steels was investigated at 450°–650 °C ...
Field and Laboratory Evaluations of Commercial and Next Generation Alumina Forming Austenitic Foil for Advanced Recuperators
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Aluminaforming austenitic (AFA) steels represent a new class of corrosionand creepresistant austenitic steels designed to enable higher temperature recuperators. Field trials are in progress for commercially rolled foil ...
CSV
RIS