Search
CSV
RISEffects of Temperature on Formation of Insolubles in Aviation Fuels
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Ten aviation turbine fuels (five Jet-A fuels, three JP-5, one JP-8, and one JPTS) were stressed at 185 and 225°C in a single-pass heat exchanger. On the basis of several criteria applied ...
Evaluation of the Effectiveness of a Metal Deactivator and Other Additives in Reducing Insolubles in Aviation Fuels
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Surface fouling in aircraft fuel lines resulting from autoxidation of aviation fuel leads to reduced efficiency as deposits collect on heat exchangers, nozzles, and servocontrols and may ultimately ...
Degradation of a Jet A Fuel in a Single-Pass Heat Exchanger
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The formation of bulk and surface insolubles in a Jet A fuel during a single pass through heated stainless-steel tubes has been studied. Low temperature and low flow rates were utilized to ...
Surface Fouling in Aviation Fuels: An Isothermal Chemical Study
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Surface fouling in aircraft fuel lines that results from autoxidation of aviation fuel remains a serious and very complicated problem. This area has been studied using two Jet-A fuels, POSF-2827 ...