Search
Now showing items 1-10 of 10
Bearing Capacity in Long-Span Tubular Truss Chords
Publisher: American Society of Civil Engineers
Abstract: Existing design specifications used in the United States and abroad do not address the limit state of bearing failure that may govern in the design of tubular truss chords at the supports. The lack of treatment of this ...
Minor Axis Moment-Thrust Response Behavior in Steel I-Shaped Members
Publisher: American Society of Civil Engineers
Abstract: Most current design specifications employed throughout the world prescribe the use of so-called interaction equations for the case of beam–columns. Most often these interaction equations are optimized for use with the case ...
Structural Ductility in Hybrid High Performance Steel Beams
Publisher: American Society of Civil Engineers
Abstract: The present study employs experimentally verified nonlinear finite element modeling techniques for the study of hybrid high performance steel I-shaped beams. An evaluation as to the appropriateness of using the current ...
Cross-Sectional Compactness and Bracing Requirements for HPS483W Girders
Publisher: American Society of Civil Engineers
Abstract: An evaluation as to the appropriateness of using the current American building and bridge specification (according to AASHTO 1998 and AISC 1999) provisions for cross-sectional compactness and adequate bracing is carried ...
Use of Fiber-Reinforced Polymer Composite Elements to Enhance Structural Steel Member Ductility
Publisher: American Society of Civil Engineers
Abstract: An innovative use of fiber-reinforced polymer composite materials to control the manifestation of local buckling in a steel section during plastic hinging is discussed in the present work. This discussion focuses on a ...
Construction of a Horizontally Curved Steel I-Girder Bridge. Part I: Erection Sequence
Publisher: American Society of Civil Engineers
Abstract: In the case of horizontally curved steel I-girder bridges, girder and cross-frame members are frequently detailed for erection in the no-load condition as a matter of convention. As a result, it is imperative that the ...
Construction of a Horizontally Curved Steel I-Girder Bridge. Part II: Inconsistent Detailing
Publisher: American Society of Civil Engineers
Abstract: The erection of horizontally curved steel I-girder bridges tends to be more complex than the erection of straight steel I-girder bridges. The erection of a curved steel I-girder bridge can be further complicated when the ...
Curved Steel I-Girder Bridge Response during Construction Loading: Effects of Web Plumbness
Publisher: American Society of Civil Engineers
Abstract: Horizontally curved steel I-girder bridge systems tend to deflect and rotate out of plane under the action of gravity. Oftentimes, this response will lead to a condition wherein the subsequent girder cross-sectional ...
Service Load Effective Compression Flange Width in Fiber Reinforced Polymer Deck Systems Acting Compositely with Steel Stringers
Publisher: American Society of Civil Engineers
Abstract: This paper reports on the field study of a steel stringer-fiber reinforced polymer (FRP) deck composite bridge in Pennsylvania. The objective of the study is to assess the effective compression flange width in the FRP deck ...
Fatigue and Strength Performance of Concrete-Filled Steel-Grid Bridge Deck
Publisher: American Society of Civil Engineers
Abstract: The present paper reports on the results from a series of full-scale experimental tests carried out on concrete-filled steel-grid bridge deck assemblies. The testing focused on assessing the fatigue performance and ultimate ...
CSV
RIS