Search
Now showing items 1-10 of 24
High-Temperature Oxidation Behavior of 214Cr-1Mo Steel in Air–Part 2: Scale Growth, Metal Loss Kinetics, and Stress Enhancement Factors During Creep Testing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The oxide-scale growth and metal loss kinetics during oxidation in air of 2 1/4 Cr-1 Mo steel were studied at 600, 700, and 800°C for times up to 1000 h, with cylindrical specimens ...
High-Temperature Oxidation Behavior of 214Cr-1Mo Steel in Air—Part 1: Gain of Mass Kinetics and Characterization of the Oxide Scale
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The oxidation behavior of 214Cr-1Mo steel was studied at 600, 700 and 800°C for a sequence of times up to 1000 h, using cylindrical specimens of the material, similar to testpieces used ...
Erratum: “The Band Gap Formation in Rotors With Longitudinal Periodicity and Quasi-Periodicity” [ASME J. Eng. Gas Turbines Power, 2022, 144(5), p. 051003; DOI: 10.1115/1.4053193]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Equation (10) gives ∑j=1nf(xj)≈1Δx∫0Lf(x) dxwhere f(xj)=mjρALϕi(xj)ϕk(xj)Considering that all disks have the same mass mD, then f(xj)=mDρALϕi(xj)ϕk(xj)Hence, from Eq. (10) (11)∑j=1NDmDρALϕi(xj)ϕk(xj)≈1Δx∫0LmDρALϕi(x)ϕk(x ...
Cost Contingency Management
Publisher: American Society of Civil Engineers
Abstract: In the practice of project management, cost contingencies have the objective of covering probable cost increases (risks) above target estimates. Due to the variable performance nature for a wide range of activities, ...
Probabilistic Control of Project Performance Using Control Limit Curves
Publisher: American Society of Civil Engineers
Abstract: This study introduces a new probabilistic project control concept to assure an acceptable forecast of final project performance, in terms of not exceeding planned budget and schedule risk levels. This concept consists in ...
Optimization of Band Gaps in Rotors With Longitudinal Periodicity and Quasi-Periodicity
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Structures with inertia periodicity present the phenomenon of band gap formation, i.e., the appearance of regions in the frequency spectrum with a higher modal spacing and lower vibration response. Rotating machines can ...
Behavior of Impregnated Paving Geotextiles: Study of Optimum Tack Coat Rate
Publisher: American Society of Civil Engineers
Abstract: Paving geotextiles are becoming increasingly used in highway construction overlays in order to recover cracked asphalt pavements. In antireflective cracking systems, the geosynthetic should have the ability to absorb and ...
Characterizing the Diurnal Cycle of Low-Level Circulation and Convergence Using CFSR Data in Southeastern South America
Publisher: American Meteorological Society
Abstract: he focus of this study is the characterization of the diurnal cycle of low-level wind and divergence field (under two different synoptic situations observed during the South American Low-Level Jet Experiment) within the ...
Calculation of Air Temperatures above the Urban Canopy Layer from Measurements at a Rural Operational Weather Station
Publisher: American Meteorological Society
Abstract: rban canopy models (UCMs) are being used as urban-climate prediction tools for different applications including outdoor thermal comfort and building energy consumption. To take advantage of their low computational cost, ...
Pullout Resistance of Individual Longitudinal and Transverse Geogrid Ribs
Publisher: American Society of Civil Engineers
Abstract: This paper presents an evaluation of the soil-geogrid interaction, conducted to quantify the contributions of passive and interface shear mechanisms to the overall pullout resistance of geogrids. An experimental testing ...
CSV
RIS