Search
Now showing items 1-10 of 60
A New Technique for Stabilizing the Flow and Improving the Performance of Vaneless Radial Diffusers
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments were conducted to investigate the effects of using small exit vanes on the characteristics of an otherwise vaneless radial diffuser of outer radius and width-to-inlet radius ratios ...
Dynamic Response of a Centrifugal Blower to Periodic Flow Fluctuations
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experimental investigation of the dynamic response of a centrifugal blower to periodic flow rate modulations was carried out at different blower operating conditions. For modulation frequencies ...
Discrete Frequency Noise From Lifting Fans
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Discrete frequency noise characteristics of a research lifting fan is investigated analytically. Based on steady aerodynamic data of the fan, unsteady aerodynamic forces acting on the rotor and ...
Impact of the Lattice Angle on the Effective Properties of the Octet-Truss Lattice Structure
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Cellular materials are found extensively in nature, such as wood, honeycomb, butterfly wings, and foam-like structures like trabecular bone and sponge. This class of materials proves to be structurally efficient by combining ...
Optimization of the Design of Hydrogen Production Systems Based on Product Cost
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this work, the design of a hydrogen production system was optimized for Algiers in Algeria. The system produces hydrogen by electrolysis using a photovoltaic (PV) generator as a source of electricity. All the elements ...
Influence of Crosslinking on the Plastic Behavior of Amorphous Polymers at Large Strains
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The mechanical properties of three grades of PMMA, one linear and two crosslinked, are investigated in tension below and above the glass transition temperature. It is found that strain-hardening ...
Pore-Scale Modeling of Fine-Particle Migration in Granular Filters
Publisher: American Society of Civil Engineers
Abstract: Fine-particle migration and associated internal erosion are major concerns for dam safety. Granular filters are used to prevent fine-particle migration, and several empirical models have been introduced for the design of ...
Some Aspects of the Impact of Multidirectional Shaking on Liquefaction of Level and Sloping Granular Deposits
Publisher: American Society of Civil Engineers
Abstract: A very limited number of computational studies have been presented for the analysis of the response of saturated granular soils to multidirectional shaking despite it being the realistic mode of loading that resembles an ...
Modeling Adsorption of Copper on Amine-Functionalized SBA-15: Predicting Breakthrough Curves
Publisher: American Society of Civil Engineers
Abstract: Dynamic experiments on the adsorption of copper ions were conducted in a laboratory packed bed containing amine-modified SBA-15 pellets. Breakthrough curves were analyzed at different flow rates and after two adsorption–desorption ...
Optimization of an Unstructured First-Order Kinetics Model of Cyclically Operated Bioreactors
Publisher: American Society of Civil Engineers
Abstract: A procedure for the optimization of an unstructured first-order kinetics model of cyclically operated biological reactors for the biodegradation of a single pollutant is developed using a combination of analytical and ...
CSV
RIS