Show simple item record

dc.contributor.authorS. A. R. Naga
dc.date.accessioned2017-05-08T23:20:29Z
dc.date.available2017-05-08T23:20:29Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#90_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99973
dc.description.abstractAn analytical study has been herein presented to predict the stress distribution in thick-walled porous (permeable) cylinders subjected to internal and/or external pressures. The maximum induced stress in the tangential direction is derived with due consideration to pipes applications assuming either single or compound cylinders. Results have been displayed in the form of charts to assist in design procedures. Results confirmed that the induced stresses in porous pipes are greater than that developed in impermeable cylinders. Also, coating of porous cylinders with an impermeable coating or fitting a porous cylinder inside a solid one would cause higher stress values to develop in the porous matrix.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical Study of Thick Walled Porous Cylinder
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225776
dc.journal.fristpage90
dc.journal.lastpage94
dc.identifier.eissn1528-8889
dc.keywordsCylinders
dc.keywordsStress
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsPipes
dc.keywordsExternal pressure
dc.keywordsFittings
dc.keywordsStress concentration AND Design
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record