Show simple item record

dc.contributor.authorP. A. Dearnley
dc.date.accessioned2017-05-08T23:20:29Z
dc.date.available2017-05-08T23:20:29Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#68_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99971
dc.description.abstractA series of commercially available cemented carbides coated with single or composite layers of TiC, TiN, and Al2 O3 were used to cut three types of steel, En8 (∼AISI 1042), En24 (∼AISI 4340), and En9 (∼AISI 1055). For comparison, two uncoated cemented carbides and some Al2 O3 -ceramic inserts were also tested. The worn surfaces were examined using optical and scanning electron microscopy techniques and tool/work interfacial conditions were evaluated from quick-stop experiments and tool temperature estimates. By linking this information with observed wear rates, various rake and flank wear mechanisms are proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRake and Flank Wear Mechanisms of Coated and Uncoated Cemented Carbides
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225773
dc.journal.fristpage68
dc.journal.lastpage82
dc.identifier.eissn1528-8889
dc.keywordsWear
dc.keywordsMechanisms
dc.keywordsTemperature
dc.keywordsComposite materials
dc.keywordsSteel
dc.keywordsCeramics AND Scanning electron microscopy
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record