Show simple item record

dc.contributor.authorR. D. Blevins
dc.date.accessioned2017-05-08T23:20:29Z
dc.date.available2017-05-08T23:20:29Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#61_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99970
dc.description.abstractAn analytical and experimental investigation has been made of the wear of a heat exchanger tube vibrating against a tube support. The purpose of this investigation is to develop a predictive model for onset of tube wear and experimentally investigate the tube dynamics and the wear mechanism. The analytical model is based on impact wear theory. The rate of wear of a tube in forced vibration was measured as a function of temperature, amplitude of vibration, frequency of vibration, material, and environment. Tube-support impact velocity was measured using high-speed cinematography, and metallographic examination of the wear specimens was performed using a scanning electron microscope. The result is an experimentally validated model for onset of wear and experimental data for wear rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVibration-Induced Wear of Heat Exchanger Tubes
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225772
dc.journal.fristpage61
dc.journal.lastpage67
dc.identifier.eissn1528-8889
dc.keywordsWear
dc.keywordsHeat exchangers
dc.keywordsVibration
dc.keywordsMechanisms
dc.keywordsDynamics (Mechanics)
dc.keywordsTemperature
dc.keywordsScanning electron microscopes AND Oscillating frequencies
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record