Show simple item record

dc.contributor.authorHan C. Wu
dc.contributor.authorPeter C. T. Chen
dc.contributor.authorM. R. Aboutorabi
dc.date.accessioned2017-05-08T23:20:28Z
dc.date.available2017-05-08T23:20:28Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#48_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99967
dc.description.abstractThe endochronic theory of plasticity is applied to discuss the cyclic full-reversed torsional loading of a solid bar with circular cross section. Numerical techniques are employed to obtain the solution. The parameters of the constitutive equations are determined from the test data of thin-walled specimens. These parameters are then used without alteration to compute stress distributions within the solid specimen. Special attention is given to the residual stress distribution. It is shown that reasonable results are obtained. The relation of torque versus strain at the outermost fiber of the solid specimen provides an ultimate check of the theory as applied to this case.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCyclic Torsion of a Circular Cylinder and Its Residual Stress Distribution
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225770
dc.journal.fristpage48
dc.journal.lastpage52
dc.identifier.eissn1528-8889
dc.keywordsTorsion
dc.keywordsStress concentration
dc.keywordsCircular cylinders
dc.keywordsConstitutive equations
dc.keywordsTorque
dc.keywordsPlasticity
dc.keywordsFibers AND Stress
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record