Show simple item record

dc.contributor.authorW. J. Mills
dc.contributor.authorL. A. James
dc.date.accessioned2017-05-08T23:20:28Z
dc.date.available2017-05-08T23:20:28Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#41_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99966
dc.description.abstractThe microstructural features that influenced the fatigue-crack growth behavior of as-welded, conventional heat-treated, and modified heat-treated Alloy 718 GTA weldments were studied. Electron fractographic examination revealed that operative fatigue mechanisms were dependent on microstructure, temperature and stress intensity factor. All specimens exhibited three basic fracture surface morphologies at temperatures up to 538°C: crystallographic faceting at low stress intensity range (ΔK) levels, striation formation at intermediate values, and dimples coupled with striations in the highest ΔK regime. At 649°C, extensive amounts of intergranular cracking were observed. Laves and δ particles in the conventional heat-treated material nucleated microvoids ahead of the advancing crack front and caused an overall acceleration in crack growth rates at intermediate and high ΔK levels. The modified heat treatment removed many of these particles from the weld zone, thereby improving its fatigue resistance. The dramatically improved fatigue properties exhibited by the as-welded material were attributed to compressive residual stresses introduced by the welding process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Heat-Treatment Upon the Fatigue-Crack Growth Behavior of Alloy 718 Weldments—Part II: Microscopic Behavior
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225769
dc.journal.fristpage41
dc.journal.lastpage47
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsFatigue cracks
dc.keywordsHeat treating (Metalworking)
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsParticulate matter
dc.keywordsFracture (Process)
dc.keywordsFractography
dc.keywordsFatigue properties
dc.keywordsMechanisms
dc.keywordsWelding
dc.keywordsElectrical resistance
dc.keywordsResidual stresses AND Electrons
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record