Show simple item record

dc.contributor.authorM. T. Yu
dc.contributor.authorT. H. Topper
dc.date.accessioned2017-05-08T23:20:28Z
dc.date.available2017-05-08T23:20:28Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#19_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99963
dc.description.abstractThe fatigue crack growth rate behavior of a SAE1045 steel in the as received condition and four different quenched and tempered conditions was studied as a function of stress ratio and peak compressive overload. The threshold stress intensity behavior of the quenched and tempered conditions was not sensitive to changes of monotonic mechanical properties. The threshold decreased linearly with increasing positive stress ratio and compressive peak load level. As received ferritic-pearlitic SAE1045 steel was much more sensitive to stress ratio and compressive peak load than any of the quenched and tempered conditions studied.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effects of Material Strength, Stress Ratio, and Compressive Overload on the Threshold Behavior of a SAE1045 Steel
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225765
dc.journal.fristpage19
dc.journal.lastpage25
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsStrength (Materials)
dc.keywordsStress
dc.keywordsPeak load
dc.keywordsMechanical properties AND Fatigue cracks
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record