Show simple item record

dc.contributor.authorN. Ohno
dc.contributor.authorT. Ueno
dc.contributor.authorS. Murakami
dc.date.accessioned2017-05-08T23:20:27Z
dc.date.available2017-05-08T23:20:27Z
dc.date.copyrightJanuary, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26902#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99960
dc.description.abstractThe constitutive model of creep proposed by the present authors on the basis of a creep-hardening surface in creep strain space (CHS model) is first modified to incorporate creep recovery. It is assumed that total creep strain can be divided into two parts; i.e., a part which recovers anelastically after stress removal and an irrecoverable part. These two parts are described by McVetty’s equation and the CHS model, respectively. Then, the validities of the modified and the original CHS model are discussed by performing creep tests of type 304 stainless steel under cyclic reversed torsion combined with constant tension at 600°C.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Constitutive Model of Creep Describing Creep Recovery and Material Softening Caused by Stress Reversals
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225766
dc.journal.fristpage1
dc.journal.lastpage6
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsStress
dc.keywordsConstitutive equations
dc.keywordsEquations
dc.keywordsStainless steel
dc.keywordsTension
dc.keywordsHardening AND Torsion
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record