Show simple item record

dc.contributor.authorP. T. Purtscher
dc.contributor.authorY. W. Cheng
dc.contributor.authorP. N. Li
dc.date.accessioned2017-05-08T23:20:27Z
dc.date.available2017-05-08T23:20:27Z
dc.date.copyrightApril, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26903#161_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99952
dc.description.abstractConstant-load-amplitude stage II fatigue crack growth rates at 4 K were measured for duplex stainless steel castings. The results show that at a ΔK of 60 MPa•m1/2 , da/dN = 7.6 × 10−4 mm/cycle for an alloy with 1 percent ferrite. For an alloy with 8 percent ferrite, da/dN is 35 percent, and for an alloy with 29 percent ferrite, da/dN is 260 percent greater than for the 1 percent ferrite alloy. However, the exponent in the Paris equation does not change appreciably (less than 18 percent) as the ferrite content changes from 1 to 29 percent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth of Duplex Stainless Steel Castings at 4 K
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225793
dc.journal.fristpage161
dc.journal.lastpage165
dc.identifier.eissn1528-8889
dc.keywordsFatigue cracks
dc.keywordsStainless steel
dc.keywordsFerrites (Magnetic materials)
dc.keywordsAlloys
dc.keywordsStress
dc.keywordsCycles AND Equations
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record