Show simple item record

dc.contributor.authorM. Sakata
dc.contributor.authorM. Kanzawa
dc.contributor.authorN. Ogure
dc.contributor.authorS. Aoki
dc.contributor.authorK. Kishimoto
dc.date.accessioned2017-05-08T23:20:26Z
dc.date.available2017-05-08T23:20:26Z
dc.date.copyrightApril, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26903#154_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99951
dc.description.abstractThe fracture of rotating disks that have cracks and/or notches is predicted employing the crack instability criterion based on the J-integral R-curve approach characterizing a material resistance to fracture. The J-integrals of cracked rotating disks are calculated by an elastic-plastic finite element method taking account of the thickness effects. Spin tests were carried out on disks having fatigue cracks and/or notches and the crack extensions as well as the bursting speeds of the disk specimens were measured. It is shown that the predicted values of bursting speed are in good agreement with those obtained by the experiment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack Growth and Instable Fracture of Rotating Disks
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225792
dc.journal.fristpage154
dc.journal.lastpage160
dc.identifier.eissn1528-8889
dc.keywordsFracture (Process)
dc.keywordsRotating Disks
dc.keywordsDisks
dc.keywordsFatigue cracks
dc.keywordsElectrical resistance
dc.keywordsFinite element methods
dc.keywordsParticle spin AND Thickness
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record