Show simple item record

dc.contributor.authorY. Ohashi
dc.contributor.authorM. Kawai
dc.contributor.authorT. Kaito
dc.date.accessioned2017-05-08T23:20:25Z
dc.date.available2017-05-08T23:20:25Z
dc.date.copyrightApril, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26903#101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99940
dc.description.abstractThe stress-range and path-shape dependencies of multiaxial nonproportional cyclic hardening were studied for annealed type 316 stainless steel at 600°C by means of stress controlled tests. Cyclic experiments along circular stress paths with constant effective stresses in the axial-torsional stress plane were first performed. The significant cyclic hardening and its stress-range dependency observed for the circular stress cyclings were quantitatively shown in reference to the cyclic stress-strain curves resulted from uniaxial stress cyclings. Then, to discuss the effect of path-shape, the cyclic tests along square stress paths inscribed by the above circular paths, as well as the tests where uniaxial cyclings and torsional ones were alternated, were also carried out. As a result of these tests, the cyclic hardenings for square paths were found to be almost equivalent to those for their circumscribed circular paths. The other type of stress cyclings caused almost the same amount of cyclic hardenings as those for the circular cyclings of the identical stress-ranges.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInelastic Behavior of Type 316 Stainless Steel Under Multiaxial Nonproportional Cyclic Stressings at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225781
dc.journal.fristpage101
dc.journal.lastpage109
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsStainless steel
dc.keywordsStress
dc.keywordsHardening
dc.keywordsHardening (Curing)
dc.keywordsShapes AND Stress-strain curves
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record