Show simple item record

dc.contributor.authorT. Kawakubo
dc.contributor.authorM. Hishida
dc.date.accessioned2017-05-08T23:20:24Z
dc.date.available2017-05-08T23:20:24Z
dc.date.copyrightJuly, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26906#240_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99933
dc.description.abstractStress corrosion crack growth during slow strain rate testing was investigated using elastic-plastic fracture mechanics. Thin compact and center-notched specimens of sensitized Type 304 stainless steel were examined at different extension rates in high temperature oxygenated water. The analytical results showed that the crack growth rate has a best correlation with a time differential of the J-integral, which is an estimate of a crack tip deformation rate. Based on the analysis, a new mechanistic model under both monotonic and cyclic loadings was suggested, where cracking was classified into three categories depending on the environmental acceleration, i.e., mechanical cracking, corrosion enhanced mechanical cracking, and stress corrosion cracking.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic Fracture Mechanics Analysis on Environmentally Accelerated Cracking of Stainless Steel in High Temperature Water
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225810
dc.journal.fristpage240
dc.journal.lastpage245
dc.identifier.eissn1528-8889
dc.keywordsFracture mechanics
dc.keywordsFracture (Process)
dc.keywordsStainless steel
dc.keywordsWater
dc.keywordsHigh temperature
dc.keywordsStress corrosion cracking
dc.keywordsFracture (Materials)
dc.keywordsCorrosion
dc.keywordsTesting AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record