Show simple item record

dc.contributor.authorR. Viswanathan
dc.contributor.authorS. M. Bruemmer
dc.date.accessioned2017-05-08T23:20:22Z
dc.date.available2017-05-08T23:20:22Z
dc.date.copyrightOctober, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26907#316_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99913
dc.description.abstractThe toughness of steam turbine rotors degrades with time of service exposure in the range of 340°–540°C. There is a need to estimate the toughness degradation that has occurred in order to assess the reliability, remaining life, and further operational parameters for the rotors. Since it is not possible to take large specimens from operating rotors to evaluate the rotor toughness, nondestructive or relatively nondestructive techniques involving removal of small samples are needed. To serve this need, several techniques such as composition based correlations, grain boundary analysis by Auger electron spectroscopy, analytical electron microscopy, and secondary ion mass spectroscopy, chemical and electrochemical etching, eddy current measurements and mechanical testing of miniature samples have been explored by the electric power industry. This paper presents an overview of the principal results emerging from the various on-going projects in this area.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIn-Service Degradation of Toughness of Steam Turbine Rotors
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225825
dc.journal.fristpage316
dc.journal.lastpage324
dc.identifier.eissn1528-8889
dc.keywordsRotors
dc.keywordsSteam turbines
dc.keywordsToughness
dc.keywordsEtching
dc.keywordsMechanical testing
dc.keywordsElectricity (Physics)
dc.keywordsMeasurement
dc.keywordsMass spectrometry
dc.keywordsElectron microscopy
dc.keywordsReliability
dc.keywordsEddy currents (Electricity)
dc.keywordsGrain boundaries
dc.keywordsAugers AND Electron spectroscopy
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record