Show simple item record

dc.contributor.authorH. M. Shang
dc.contributor.authorG. S. Tan
dc.contributor.authorW. C. M. Tan
dc.date.accessioned2017-05-08T23:20:21Z
dc.date.available2017-05-08T23:20:21Z
dc.date.copyrightOctober, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26907#298_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99910
dc.description.abstractIn this investigation, two double-stage forming processes are used to study the effects of prestrain on sheet metal formability. The processes chosen are the bulge test and the plunger test using a die throat to punch diameter ratio of 2.42. It is seen that during the second stage of forming, deformation and shape of the deformed shell are influenced by the level of prestrain and strain gradients on the prestrained workpiece. An improved formability is observed when the workpiece for the plunger test is prestrained by hydroforming, but the formability is reduced when the prestraining process becomes the plunger test. The present results also imply that care should be taken in utilizing the forming limit diagram even if it is constructed from double-stage forming, in which strain gradient on the prestrained workpiece is generally absent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Prestrain With Strain Gradient Present on Sheet Metal Formability
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225823
dc.journal.fristpage298
dc.journal.lastpage306
dc.identifier.eissn1528-8889
dc.keywordsSheet metal
dc.keywordsGradients
dc.keywordsShapes
dc.keywordsShells AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record