Show simple item record

dc.contributor.authorA. R. Ragab
dc.contributor.authorS. A. Khorshid
dc.contributor.authorR. M. Takla
dc.date.accessioned2017-05-08T23:20:21Z
dc.date.available2017-05-08T23:20:21Z
dc.date.copyrightOctober, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26907#293_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99909
dc.description.abstractLimiting strains during tube bulging have been investigated for long tubes subjected to an internal pressure together with an external axial force. A strain instability criterion which takes into consideration the inevitable geometrical defects in the tube wall is developed. The results revealed that small eccentricities produce a substantial decrease in the amount of deformation sustained by the tube at instability conditions. Moreover, the sensitivity to such defects increases for tubes made of low strain-hardening materials. The developed strain instability criterion has been subjected to an experimental verification where commercially pure aluminium tubes have been bulged to fracture. Experimental results are found to be in good agreement with theory, thus justifying the validity of this instability criterion and the resulting limit strains.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLimit Strains for Thin-Walled Tubes With Initial Thickness Inhomogeneity
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225822
dc.journal.fristpage293
dc.journal.lastpage297
dc.identifier.eissn1528-8889
dc.keywordsForce
dc.keywordsPressure
dc.keywordsDeformation
dc.keywordsAluminum
dc.keywordsProduct quality
dc.keywordsFracture (Process)
dc.keywordsThickness AND Work hardening
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record