Show simple item record

dc.contributor.authorT. Ihara
dc.contributor.authorM. C. Shaw
dc.date.accessioned2017-05-08T23:20:21Z
dc.date.available2017-05-08T23:20:21Z
dc.date.copyrightOctober, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26907#271_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99905
dc.description.abstractAll real materials contain defects which significantly reduce the fracture stress of brittle materials. It has been proposed by Griffith [3] that brittle fracture occurs when the maximum intensified tensile stress on the surface of a defect reaches a critical value. It has recently been found [1] that for many brittle materials of high quality, the nature and density of the defects are such that they may be modelled by isolated cylindrical voids. This study considers the stress intensification consequences of the close spacing of cylindrical defects that are filled with a material having a Young’s modulus different than that of the matrix.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Concentrations for Filled and Unfilled Closely Spaced Cylindrical Defects
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225818
dc.journal.fristpage271
dc.journal.lastpage276
dc.identifier.eissn1528-8889
dc.keywordsProduct quality
dc.keywordsStress
dc.keywordsBrittleness
dc.keywordsDensity
dc.keywordsElasticity
dc.keywordsFracture (Process)
dc.keywordsBrittle fracture AND Tension
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record