Show simple item record

dc.contributor.authorMikael Jonsson
dc.contributor.authorLennart Karlsson
dc.contributor.authorLars-Erik Lindgren
dc.date.accessioned2017-05-08T23:20:21Z
dc.date.available2017-05-08T23:20:21Z
dc.date.copyrightOctober, 1985
dc.date.issued1985
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26907#265_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99904
dc.description.abstractSimulation of automatic butt-welding of large plates was investigated. Two different steels were considered. The plates were tack-welded before the butt-welding. The simulation includes the tack-welding, the butt-welding and the cooling to room temperature. The simulations should lead to an understanding of the mechanics behind the change in gap width in front of the moving arc, which is of importance in automatic welding production. The residual stresses due to the butt-welding were also studied. The magnitude and the distribution of the residual stresses are important in design of welded structures. The change in gap width in front of the moving arc and the residual stresses depend on the material in the plates, the restraints of the plates, the size of the plates and the welding parameters. The most important welding parameters are the arc energy per unit length of the weld and the welding speed. The change in gap width depends also on the tack-welding procedure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeformations and Stresses in Butt-Welding of Large Plates With Special Reference to the Mechanical Material Properties
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225817
dc.journal.fristpage265
dc.journal.lastpage270
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsMaterials properties
dc.keywordsPlates (structures)
dc.keywordsButt welding
dc.keywordsWelding
dc.keywordsResidual stresses
dc.keywordsDesign
dc.keywordsEngineering simulation
dc.keywordsTemperature
dc.keywordsCooling AND Steel
dc.treeJournal of Engineering Materials and Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record