Show simple item record

dc.contributor.authorJ. P. Langlinais
dc.contributor.authorA. T. Bourgoyne
dc.contributor.authorW. R. Holden
dc.date.accessioned2017-05-08T23:20:00Z
dc.date.available2017-05-08T23:20:00Z
dc.date.copyrightMarch, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26403#142_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99719
dc.description.abstractThe calculation of single-phase and two-phase flowing pressure gradients in a well annulus is generally based on an extension of empirical correlations developed for Newtonian fluids in circular pipes. Various techniques for extending pipe flow correlations to an annular geometry have been presented in the literature which involve the representation of the annular well geometry with an equivalent circular diameter and the representation of non-Newtonian fluid behavior with an apparent Newtonian viscosity. Unfortunately, little experimental data have been available which would allow a comparison of the relative accuracy of the various proposed techniques. In this study, experimental pressure gradient data have been taken in two 6000-ft wells. Frictional pressure losses for single-phase flow (mud only) in two annuli were compared to values predicted by the Bingham plastic and power law models. These calculations utilized the equivalent diameters defined by the Crittendon criteria, the hydraulic diameter, and the slot approximation. Also, total pressure difference for two-phase flow was measured for one annular geometry. This data was compared to that predicted by the Poettmann and Carpenter, Hagedorn and Brown, Orkiszewski, and Beggs and Brill correlations. Comparison of experimental data with the various prediction techniques was favorable, each having advantage in certain situations. For the data investigated, the Crittendon criteria using a Bingham plastic model gave the best results. The two-phase flow data was best predicted by the Hagedorn and Brown correlation utilizing an equivalent hydraulic diameter.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFrictional Pressure Losses for Annular Flow of Drilling Mud and Mud-Gas Mixtures
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231154
dc.journal.fristpage142
dc.journal.lastpage151
dc.identifier.eissn1528-8994
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsDrilling
dc.keywordsMixtures
dc.keywordsGeometry
dc.keywordsPressure gradient
dc.keywordsTwo-phase flow
dc.keywordsAnnulus
dc.keywordsApproximation
dc.keywordsNon-Newtonian fluids
dc.keywordsPipe flow
dc.keywordsPipes
dc.keywordsFluids
dc.keywordsWells AND Viscosity
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record