Show simple item record

dc.contributor.authorT. Overvik
dc.contributor.authorG. Moe
dc.date.accessioned2017-05-08T23:19:57Z
dc.date.available2017-05-08T23:19:57Z
dc.date.copyrightMarch, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26403#2_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99695
dc.description.abstractPart of the results of an investigation with multiple rise configuration exposed to steady currents are presented. These tests were performed on smooth sectional riser models in a water flume at Reynolds numbers in the range 0.5 × 104 to 0.5 × 105 . Reynolds number is based upon the diameter of the central cylinder (DC ). Both the added mass, the frequency of vibration and the in-line steady drag coefficient are discussed both for vibration in the lock-in range and in the galloping mode.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAdded Mass and In-Line Steady Drag Coefficient of Multiple Risers
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231159
dc.journal.fristpage2
dc.journal.lastpage11
dc.identifier.eissn1528-8994
dc.keywordsDrag (Fluid dynamics)
dc.keywordsPipeline risers
dc.keywordsReynolds number
dc.keywordsVibration
dc.keywordsCurrent
dc.keywordsCylinders
dc.keywordsFlumes
dc.keywordsWater AND Locks (Waterways)
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record