Show simple item record

dc.contributor.authorM. M. Bernitsas
dc.contributor.authorC. J. Hoff
dc.contributor.authorJ. E. Kokarakis
dc.date.accessioned2017-05-08T23:19:56Z
dc.date.available2017-05-08T23:19:56Z
dc.date.copyrightJune, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26404#256_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99687
dc.description.abstractMarine risers, and offshore structures in general, may have undesirable natural frequencies and/or mode shapes. Structural redesign is mandatory in such cases. An Inverse Perturbation Redesign (IPR) method, which uses only the finite element analysis of the baseline system and was developed in previous work for general structures, is extended in this work to handle systems with geometric stiffness matrices like marine risers. The IPR method is currently applicable to undamped structural systems or systems with Rayleigh damping and is valid for large or small changes which are frequently required to change modal characteristics of offshore structures. The vibratory characteristics of risers can be altered by modifying among others, the riser top tension, the drilling mud density and the geometry of the riser tubes. The effects of their change on the riser frequencies and modes are derived and applied to two typical riser redesign problems using the IPR method.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonlinear Inverse Perturbation in Structural Dynamics Redesign of Risers
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231186
dc.journal.fristpage256
dc.journal.lastpage263
dc.identifier.eissn1528-8994
dc.keywordsStructural dynamics
dc.keywordsPipeline risers
dc.keywordsFrequency
dc.keywordsOffshore structures
dc.keywordsMarine drilling risers
dc.keywordsGeometry
dc.keywordsShapes
dc.keywordsStiffness
dc.keywordsTension
dc.keywordsDamping
dc.keywordsFinite element analysis
dc.keywordsDensity AND Drilling
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record